A hot tub cover, sometimes called a heatshield, is a “must have” to maximize enjoyment and minimize maintenance of your hot tub. Their lifespan can depend on your climate, your cleaning and maintenance schedule and how exposed the cover is to the elements...

Soaking as little as 15 minutes a day in a Beachcomber hot tub can improve your cardiovascular health, help alleviate back and muscle pains, lower your blood pressure and even burn calories!

Hydrotherapy is simply using heat, massage, and buoyancy to help alleviate the symptoms of conditions like arthritis and muscle pain. Warm water dilates blood vessels and can increase blood flow to sore or damaged tissues, which can help tired or overworked...

Sound, Lights, BIC-e, https://store.beachcomberhottubs.com/technology

LEEP tubs include our Eco3WALL Foam Filled Insulation with the management system inside the tub cavity. HYBRID tubs include our Eco4WALL 100% cavity filled insulation for unrivaled energy efficiency with the management system "cab-forwarded" for easy...

No- it should be added during production.

LEEP tubs have the Internal Eco-Pak system built inside the hot tub cavity. Hybrid tubs have Energy Saver Management System in a Cab-Forward Engineered Pack underneath our tiered steps which make for easy access to the system. LEEP tubs do not have our...

FL codes - whether flashing or solid can be representative of a number of situations. Please call our free technical support line when you are in-front of your hot tub and our experts will walk you through some trouble shooting to confirm the issue ...

You have reduced your set temperature by more than 3 degrees below current water temp. Reduce in 2 degrees increments. Extreme outdooor temperature on tub is allowing Hush pump to heat weater. Prop up corner of cover to release excess heat.

Economy means the heater has only two 2 hour windows to come on per day. The windows can be increased by increasing the filter times.

Sleep Mode means the heater will stay off until water temperature falls 20oF/10oC below set temperature.

You have loose or missing jets in your tub and the water is backing up into the air intake system. Replace missing jets or on older tubs tighten jets or replace orings and or back gaskets.

The panel button back lighting bulbs have burnt out. They need to be replaced.

Drain tub as normal, remove plumbing assembly from jet pump return line and heater inlet blow air into these lines with a shop vac. Then remove water that comes out. Pour some RV anti freeze into floor drain and into the filter canister area - take your...

If your tub has the Hush pump, filter cycles are heater on times in Economy and Sleep mode not filter cycles. On non Hush tubs leave the default of 2 hours twice a day. If a non Hush tub has heavy use increase the hours to 4 hours twice a day.

It will depend on the fill water temperature but you can expect 5oF/2oC of heat rise per hour on a 220 volt system. If you have a 110 volt system expect a 2 oF 1oC per hour.

Beachcomber recommends TUB CLEAN followed by thorough wipe down with a clean damp cloth or chamois

Your Microfilter should be rinsed once a week. Depending on how often you use your hot tub, and how many people are using it, you may want to rinse more often. If you are enjoying your hot tub more than three times a week, you can rinse twice a week. ...

No, Hydrogen Peroxide is a weak oxidizer with no residual capacity and loses efficacy in water with higher temperatures. It is unstable in solutions over 29% and Health Canada does not recognize or approve Hydrogen Peroxide as a sanitizer. It is considered...

A level concrete slab is best, but you can use interlocking pavers or 12" x 12" concrete slabs on a screeted sand base. The Hybrid edition equipment area should be the same level as the hot tub.

Your electrician/ contractor should know these details. The electrical conduit entrance points on your Beachcomber hot tub are on the toe kick, left side and right side so your electrical entry point can be on either side - whichever one of those conduit...

A level concrete slab is best but a surface you can use interlocking pavers or 12 x12 concrete slabs on a screeted sand base. The Hybrid edition equipment area should be the same level as the hot tub.